A Beginner's Guide to Upgrading Car Lights to HID (High-Intensity Discharge) or LED (Light Emitting Diodes)

If you have been thinking about upgrading your car lights to HID or LED, you're in the right place. This blog post will guide you through the process, step-by-step, to enhance not only your visibility on the road but also the aesthetic appearance of your vehicle.

Why Upgrade to HID or LED?

Before we dive into the upgrade process, let's discuss the reasons why you might want to upgrade your car lights to HID or LED:

Superior Visibility: Both HID and LED lights offer superior visibility compared to traditional halogen lights. They produce a brighter, more focused light that can illuminate a larger area ahead of your car.
Longer Lifespan: HID and LED lights tend to last significantly longer than halogen bulbs. This means less frequent replacements, saving you time and money in the long run.
Improved Aesthetics: Upgrading to HID or LED lights can give your vehicle a sleek, modern appearance.

Shop Car Bulbs Now

How to Upgrade Your Car Lights to HID or LED

Step 1: Purchase a Conversion Kit

You will need a conversion kit that is compatible with your vehicle's make and model. These kits generally include the bulbs, ballasts (for HID), and all the necessary wiring.

Step 2: Remove the Old Halogen Bulbs

Turn off your vehicle and open the hood. Locate the back of the headlight assembly and twist the bulb counterclockwise to remove it.

Step 3: Install the HID or LED Bulbs

Insert the new HID or LED bulb into the headlight assembly, ensuring it is securely in place. Remember to avoid touching the glass part of the bulb as this can shorten its lifespan.

Step 4: Connect the Ballast (for HID)

If you're installing HID lights, you will need to connect the ballast to the bulb. The ballast regulates the electrical current to the bulb. Follow the instructions provided with your conversion kit to do this.

Step 5: Test Your New Lights

Finally, start your vehicle and turn on the headlights to ensure they are working correctly. Adjust the beam direction if necessary to ensure they are not blinding oncoming drivers.